Dry film thickness gauge with fixed sensor
Article No. 3791
byko-test Lite Fe/NFe DFT Gauge
Dry film thickness gauge - basic model
- Compact, easy to use gage for film thickness on Fe and NFe substrates
- High functionality including statistics and memory for data transfer
Features
The byko-test film thickness gage includes dew point measurement, whereas the byko-test Lite is for dry-film thickness measurement only.
- Compact design for one hand operation
- Color display with 90° and 180° flip screen
- Automatic substrate recognition
- Strong wear resistant ruby probe tip
Zero point calibration
- Key lock for only taking readings
- Statistic mode with 1000 measurement memory
- Continous measurement mode
- Stability mode warns user when instrument is tilted preventing wrong readings
Standards
Downloads
Product Brochure
Safety Instructions
Short Instructions
Knowledge
Film thickness
For all requirements associated with a coating, there is an optimal layer thickness to ensure good flow and leveling, gloss, optimal color uniformity and opacity as well as good protection against environmental influences and corrosion. If the layer thickness is too high, mechanical-technological properties such as mandrel bending tests, stone impact tests and ball impact tests deteriorate, and the cost-effectiveness of the painting process also decreases. For this reason, layer thicknesses are worked out and specified by the paint supplier and quality assurance. These must be regularly checked and documented.
Read moreAccessories
Other ALTANA divisions
A member of
