Dry film thickness gauge with fixed sensor
Article No. 3790
byko-test Fe/NFe DFT Gauge
Dry film thickness gauge plus humidity & dew point check
- 4 measurements in one instrument: Film thickness Fe/NFe, Air temperature, Relative humidity, Dew point
- SSPC specific mode for standardized measurement protocols and calibration routines
Features
The byko-test film thickness gage includes dew point measurement, whereas the byko-test Lite is for dry-film thickness measurement only.
- Compact design for one hand operation
- Color display with 90° and 180° flip screen
- Automatic substrate recognition
- Strong wear resistant ruby probe tip
- Zero, single and two point calibrations
- Key lock for only taking readings
- Hi/Low tolerance settings for pass/fail warning
- Statistics mode with 1000 measurement memory
- Continous measurement mode
- Stability mode warns user when instrument is tilted preventing wrong readings
Standards
Downloads
Product Brochure
Safety Instructions
Short Instructions
Knowledge
Film thickness
For all requirements associated with a coating, there is an optimal layer thickness to ensure good flow and leveling, gloss, optimal color uniformity and opacity as well as good protection against environmental influences and corrosion. If the layer thickness is too high, mechanical-technological properties such as mandrel bending tests, stone impact tests and ball impact tests deteriorate, and the cost-effectiveness of the painting process also decreases. For this reason, layer thicknesses are worked out and specified by the paint supplier and quality assurance. These must be regularly checked and documented.
Read moreAccessories
Other ALTANA divisions
A member of
