Gloss meter for automation
Article No. 4599
micro-gloss 60° robotic, non contact 3mm
Gloss meter 60° for automated measurement
- Single angle 60°
- Non-contact measurement with 3mm distance
- For any material: paint, plastic or even metals
- Measuring area 9 x 15 mm
Features
A stable running process is the key for uniform and consistent quality. The new micro-gloss robotic allows automatic appearance control. With the robust fixture it can be integrated into measuring systems like a xy-table. Thus, measurements are taken always on the same sample area, which ensures repeatable positioning and reliable results.
- Intelligent gloss measurement with smart communication
- Excellent repeatability and inter-instrument agreement guaranteed
- Intelligent auto diagnosis guarantees always accurate readings
- Brilliant color display easy to read - easy to use
- Statistics, Pass/Fail and Memory - ideal for QC and checks in the field
- Continuous mode to check uniformity over large areas
Technical Attributes
-
- Geometry
- 60°
-
- Performance
- -
-
- Application
- semi gloss
-
- Measuring Area
-
9 x 15 mm
-
- Measuring Area
-
0.35 x 0.6 in
-
- Distance to Surface
- non contact
-
- Measuring Range
-
0 - 1000 GU
-
- Repeatability
-
0 - 100 GU: ± 0.2 GU
100 - 2000 GU: ± 0.2 %
-
- Reproducibility
-
0 - 100 GU: ± 0.5 GU
100 - 2000 GU: ± 0.5 %
-
- Spectral sensitivity
- CIE standard observer for illuminant CIE-C
-
- Measuring time
- 0.5 seconds / geometry
-
- Memory
- 999 readings with date and time
-
- Interface
- USB
-
- Languages
- English French German Italian Spanish
-
- Power supply
- one 1.5V AA Alkaline Battery, or via USB-port
-
- Battery Capacity
- 4,000 readings
-
- Weight
- 0.4 kg
-
- Weight
- 0.9 lb
-
- Operating temperature
- 15 - 40 °C
-
- Operating temperature
- 60 - 104 °F
-
- Relative humidity
- up to 85 %, non-condensing
-
- Dimensions: L x W x H
- 15.5 x 4.8 x 7.3 cm
-
- Dimensions: L x W x H
- 6.1 x 1.9 x 2.9 in
Technical Specifications
Gloss Measurement
General
Standards
Delivery Content
Glossmeter with mounting plate
Calibration tile 60° robotic, non-contact 3mm (4602)
USB-cable micro-gloss (4405)
Battery
Traceable certificate
Manual
Carrying case
Calibration tile 60° robotic, non-contact 3mm (4602)
USB-cable micro-gloss (4405)
Battery
Traceable certificate
Manual
Carrying case
Downloads
Safety Instructions
Short Instructions
Knowledge
Gloss Measurement
Gloss measurement is an important factor in quality control to guarantee a consistent and uniform gloss of any product. The visual perception is depending on the observer, illumination and viewing conditions as well as on material and product properties. In order to measure gloss objectively instrumental measurement is performed with a gloss meter. Dependent on the gloss level and the application different geometries and functions are needed. The following article reviews visual perception of gloss, measurement principle of a gloss meter, when to use which measurement geometry and gives practical hints for special applications and how to deal with limitations.
Read moreGuide for Reliable Gloss Data
Uniform and consistent gloss are an essential quality criterion for a variety of products. Therefore, gloss needs to be objectively measured. Only what can be objectively measured, can be controlled and can be optimized which is of importance in product development as well as in production control. Especially in case of multi-component products a uniform gloss is an expression of “high quality”. Variations in gloss look like something is wrong and the end-user will perceive it as a defect. Therefore, gloss limits and tolerances are defined based on application and customer expectations.
Read moreAccessories
Other ALTANA divisions
A member of
