Your region and language were selected automatically. You can change this at any time in the menu on the site.
Americas | English

DIN Flow Viscosity Cup for interchangeable orifices

DIN Flow Cup 2 - 8 mm

  • Interchangeable orifice, 2,3,4,6 or 8 mm (not included)
  • Orifice can be selected, products No. 0152 (2mm) to 0158 (8mm)
Click here for Chinese price list in RMB
$210.00 €188.00 excl. taxes & shipping cost


  • Body made of anodized aluminum
  • Stainless steel orifice, interior polished
  • Calibrated against standard oils referenced to certified PTB oils (Federal Institute of Physics and Metrology of Germany) to be within 3% (drain time of calibration oil)

Technical Attributes

    Technical Specifications

  • Standard
    DIN 53211
  • Range
    see 0152 to 0158
  • Certificate
  • Orifice Diameter
    interchangeable orifices





  • Place flow cup in a precisely horizontal position using ring stand or temperature control jacket
  • Close orifice
  • Pour in test liquid
  • Draw a clean glass plate over the rim of the cup, removing superfluous liquid into the overflow reservoir and closing the cup
  • Remove glass plate horizontally
  • Open the orifice and start the stopwatch simultaneously
  • Stop the watch with the first break in the efflux stream
  • Repeat the measurement three times, each with a new sample of the same material


Guide to Viscosity Measurement

Viscosity is an important property of liquids to determine how they flow, spread, or level under certain conditions. It can be defined as a liquid’s internal resistance to flow. Being able to measure the viscosity will allow to predict the behavior in a process or an application. When applying a paint by roll application the paint viscosity will strongly influence the amount of paint applied per surface area, thereby determining both yield and hiding power. It is crucial for liquid products to undergo a viscosity measurement in incoming and outgoing QC.  

Read more
Subscribe to our Newsletter and stay informed! subscribe