Levelling / Sagging Applicators
Article No. 0813
Leveling Test Blade
Leveling Film Applicator with alternating gap clearances
- Alternating gap clearances of 4 and 12 mils
- Compliant with ASTM D4062
Certificate:
Features
The Leveling and Sagging applicator is designed to perform two tests with one device. The NYPC Leveling Blade is designed to be compliant with New York Paint Club method. The Anti-sag applicators are designed to assess paint sag in compliance with ASTM methods D3730 and D4400.
- Simple comparison test of the leveling and sagging properties
- The applicator is made of high grade stainless steel
Technical Attributes
-
- Measurement Unit
- mils
-
- Gap Clearance
- 4 mil 12 mil
-
- Gap Clearance
- 100 µm 300 µm
-
- Gap Clearance Range Levelling/Sagging
- -
-
- Weight
- 0.5 kg
-
- Weight
- 1.2 lb
-
- Dimensions: L x W x H
- 18.5 x 10 x 2.5 cm
-
- Dimensions: L x W x H
- 7.25 x 4 x 1 in
Technical Properties
Technical Specifications
General
Standards
Procedure
- Place substrate to be coated on smooth surface
- Place film applicator with desired gap depth on substrate
- Pour coating in front of gap in pulling direction
- Pull at uniform speed (approx. 25 mm/s)
- Put applicator immediately into diluted cleaning solvent and clean with brush
Accessories
Other ALTANA divisions
A member of
