Your region and language were selected automatically. You can change this at any time in the menu on the site.
Americas | English
0813

Leveling Film Applicator with alternating gap clearances

Leveling Test Blade

  • Alternating gap clearances of 4 and 12 mils
  • Compliant with ASTM D4062
$991.00 €868.00 excl. taxes & shipping cost

Features

  • Simple comparison test of the leveling and sagging properties
  • The applicator is made of high grade stainless steel

Technical Attributes

  • Weight
    0.5 kg
  • Weight
    1.2 lb
  • Dimensions: L x W x H
    18.5 x 10 x 2.5 cm
  • Dimensions: L x W x H
    7.25 x 4 x 1 in
  • Measurement Unit
    mils
  • Gap Clearance
    4 mil 12 mil
  • Gap Clearance
    100 µm 300 µm

Standards

ASTM

D4062

Procedure

  • Place substrate to be coated on smooth surface
  • Place film applicator with desired gap depth on substrate
  • Pour coating in front of gap in pulling direction
  • Pull at uniform speed (approx. 25 mm/s)
  • Put applicator immediately into diluted cleaning solvent and clean with brush
Subscribe to our Newsletter and stay informed! subscribe