Multi-angle color & effect measurement for automation
Article No. 7036
BYK-mac i Robotic
Automated color measurement ready for Industry 4.0
- Robotic system to be mounted on a robotic arm
- Excellent correlation to BYK-mac i and BYK-mac i COLOR
- Communication software, installation kit and smart-chart software included
Features
The BYK-mac i ROBOTIC allows automated multi-angle color and effect control as it is mounted on a robotic arm. The robotic system ensures measurements on the same area and a high number of measured car bodies.
- Total color impression:
- 5-angle color measurement for light/dark travel evaluation: 15° / 25° / 45° / 75° / 110°
- Additional color measurement behind the gloss for color flop analysis: -15°
- Sparkle and graininess measurement for flake characterization
- Detection and quantification of fluorescent light excited in the visible range; Intensity Emission Value
- Excellent agreement between instruments allowing usage of digital standards among the supply chain
- Stable, long-term calibration – needed only every three months
- Temperature independent results between 10 – 40° C – without calibration
- Stable positioning due to 4 trigger pins on bottom plate – operator influence minimized
- 10 year warranty on LED light source – no lamp changes needed
Technical Attributes
-
- Color Geometry
- 45° illumination; -15°, 15°, 25°, 45°, 75°, 110° aspecular viewing
-
- Measuring Area
- 87 x 23 mm (3.4 x 0.9 in)
-
- Spectral Range Colorimetric
- 400 - 700 nm, 10 nm resolution
-
- Measurement Range
- 0 to 600 % reflectance
-
- Repeatability Color
- 0.01 ΔE* (10 consecutive measurements on white)
-
- Reproducibility Color
- Grey BCRA II tiles: avg. ΔE* < 0.10 Chromatic BCRA II tiles: avg. ΔE* < 0.25
-
- Color Scales
- ΔE*; ΔE CMC; ΔE 94; ΔE 2000; ΔE DIN6175 and customer specific scales
-
- Color Indices
- Flop, Int-Em
-
- Illuminants
- A; C; D50; D65; F2; F7; F11; F12; CIE 015:2018 LED illuminants
-
- Observer
- 2°; 10°
-
- Effect Geometry
- 15°, 45°, 75° and diffused illumination; perpendicular viewing with camera
-
- Effect Parameters
- ΔS; ΔS_a; ΔS_i; ΔG
-
- Repeatability Effect
- S_a / S_i: 5% or > 0.50 / G = ± 0.05
-
- Reproducibility Effect
- S_a / S_i: 10% or > 1.00 / G = ± 0.15
-
- Object Curvature
- Radius > 40 cm
-
- Robotic requirements
-
Vibration-free operation
-
- Measuring time
- < 6 seconds
-
- Memory
- 1000 standards / samples
-
- Interface
- RS 422
-
- Power supply
- External power supply 24 VDC
-
- Weight
- 3.5 kg
-
- Weight
- 7.7 lb
-
- Operating temperature
- 10 - 42 °C
-
- Operating temperature
- 50 - 110 °F
-
- Relative humidity
- up to 85%, 35° C (95° F); non-condensing
-
- Dimensions: L x W x H
- 21 x 12.5 x 17.5 cm
-
- Dimensions: L x W x H
- 8.3 x 5 x 6.9 in
Color Measurement
Effect Measurement
General
Standards
Delivery Content
Multi-angle spectrophotometer
White calibration standard with certificate
Color checking tile
Effect checking tile
Protective cap
2 light protection covers (6417)
RS 422 Cable Kit (torsion resistant, drag chain, oil resistant, FTDI)
Mounting Kit (hex key, screws, technical drawings)
Software smart-process and smart-lab with 2 licences each
smart-robotic software
Manual
Carrying Case
White calibration standard with certificate
Color checking tile
Effect checking tile
Protective cap
2 light protection covers (6417)
RS 422 Cable Kit (torsion resistant, drag chain, oil resistant, FTDI)
Mounting Kit (hex key, screws, technical drawings)
Software smart-process and smart-lab with 2 licences each
smart-robotic software
Manual
Carrying Case
Downloads
Product Brochure
Safety Instructions
Short Instructions
Accessories
Other ALTANA divisions
A member of
