7049
Multi-angle color & effect spectrophotometer for anodized parts
BYK-mac i Pro
- Measuring area: 23 mm diameter
- 6-angle color measurement
- Graininess measurement with CCD camera
- Modified image analyzing algorithm to measure Sparkle index ANO
- Professional data documentation and analysis with Flake Analyzer and smart-chart software
Features
- Total color impression:
- 5-angle color measurement for light/dark travel evaluation: 15° / 25° / 45° / 75° / 110°
- Additional color measurement behind the gloss for color flop analysis: -15°
- Sparkle and graininess measurement for flake characterization
- Detection and quantification of fluorescent light excited in the visible range; Intensity Emission Value
- Excellent agreement between instruments allowing usage of digital standards among the supply chain
- Stable, long-term calibration – needed only every three months
- Temperature independent results between 10 – 40° C – without calibration
- Stable positioning due to 4 trigger pins on bottom plate – operator influence minimized
- 10 year warranty on LED light source – no lamp changes needed
Technical Attributes
-
- Color Geometry
- 45° illumination; -15°, 15°, 25°, 45°, 75°, 110° aspecular viewing
-
- Measuring Area
- 23 mm diameter
-
- Spectral Range (Colorimetric)
- 400 - 700 nm, 10 nm resolution
-
- Measurement Range
- 0 to 600 % reflectance
-
- Repeatability Color
- 0.01 ΔE* (10 consecutive measurements on white)
-
- Reproducibility Color
- Grey BCRA II tiles: avg. ΔE* < 0.10 Chromatic BCRA II tiles: avg. ΔE* < 0.25
-
- Color Scales
- ΔE*; ΔE CMC; ΔE 94; ΔE 2000; ΔE 99; ΔE DIN6175-2019
-
- Indices
- Flop, Int-Em
-
- Illuminants
- A; C; D50; D65; F2; F7; F11; F12
-
- Observer
- 2°; 10°
-
- Effect Geometry
- Sparkle 15° / 45° / 75, Graininess diffused illumination perpendicular viewing viewing with camera
-
- Effect Parameters
- ΔS; ΔS_a; ΔS_i; ΔG
-
- Repeatability Effect
- S_a / S_i: 5% or > 0.50 / G = ± 0.05
-
- Reproducibility Effect
- S_a / S_i: 10% or > 1.00 / G = ± 0.15
-
- Effect Parameters Anodized Surfaces
- Sparkle index ANO; Sparkle amount ANO
-
- Repeatability Effect Anodized Surfaces
- ± 250 or 2.5% (on anodized silver reference standard)
-
- Reproducibility Effect Anodized Surfaces
- ± 500 or 5.0% (on anodized silver reference standard)
-
- Measuring time
- < 6 seconds
-
- Memory
- 1000 standards / samples
-
- Display
- 2.7 in. TFT color LCD display
-
- Languages
- English French German Italian Japanese Spanish
-
- Power supply
- Rechargeable battery pack or 4 mignon AA batteries (alkaline or rechargeable)
-
- Weight
- 1.3 kg
-
- Weight
- 2.9 lb
-
- Operating temperature
- 10 - 42 °C
-
- Operating temperature
- 50 - 110 °F
-
- Relative humidity
- up to 85%, 35° C (95° F); non-condensing
-
- Dimensions: L x W x H
- 21.8 x 8.1 x 14.7 cm
-
- Dimensions: L x W x H
- 8.6 x 3.2 x 5.8 in
Color Measurement
Effect Measurement
General
Standards
Delivery Content
Multi-angle spectrophotometer
Black calibration standard (7044)
White calibration standard with certificate
Color checking tile
Effect checking tile
Online Kit BYK-mac i Pro for online data transfer and charging (7055)
Protective cap (6336)
1 light protection cover (6414)
Seal replacement kit (6348)
Cleaning set (6364)
1 rechargeable Li-ion battery pack (6359)
Software with two licensees for download:
smart-lab (4862) or smart-process (4831)
USB stick with Flake Analyzer software
Short instructions
Carrying case
1-day training
Black calibration standard (7044)
White calibration standard with certificate
Color checking tile
Effect checking tile
Online Kit BYK-mac i Pro for online data transfer and charging (7055)
Protective cap (6336)
1 light protection cover (6414)
Seal replacement kit (6348)
Cleaning set (6364)
1 rechargeable Li-ion battery pack (6359)
Software with two licensees for download:
smart-lab (4862) or smart-process (4831)
USB stick with Flake Analyzer software
Short instructions
Carrying case
1-day training
Downloads
Safety Instructions
Short Instructions
Accessories
Other ALTANA divisions
A member of
