4100
Mayer Drawdown Rod Set
Wire-wound rod set 10"
- A complete set of 12 wire-wound rods
- Allows for wet film thickness range from 0.2 mils (5 microns) to 4.0 mils (100 microns)
- A convenient bench stand comes with the set for easy handling and storage
Features
- Ideal for uniform drawdowns of thin films
- One inch of space on both ends for easy handling
- Optional bench stand to organize the rods during storage
- Can be ordered in a set of 12 wire rods
Technical Attributes
-
- Qty/Box
- 12
-
- Film Width
- 10 in
-
- Gap Clearance Range mil/µm
- {650} - {651}
-
- Weight
- 3.8 kg
-
- Weight
- 8.5 lb
-
- Dimensions
- ∅ 1.3 x 30.5 cm
-
- Dimensions
- ∅ 0.5 x 12 in
-
- Dimensions: L x W x H
- 30.4 x 26 x 3.8 cm
-
- Dimensions: L x W x H
- 12 x 10.25 x 1.5 in
Technical Properties
Technical Specifications
General
Standards
Procedure
- Place substrate to be coated on smooth surface
- Place film applicator on substrate
- Pour coating in front of gap in pulling direction
- Pull at uniform speed (approx. 25 mm/s)
- Put applicator immediately into diluted cleaning solvent and clean with brush
Delivery Content
12 wire-wound rods, cat. no. 4103 – 4152
Wire-wound rod Stand - 10" (4101)
Wire-wound rod Stand - 10" (4101)
Accessories
Other Variations
Other ALTANA divisions
A member of
