4110
Mayer Drawdown Rod - 0,65 mils
Wire-wound rod 10" - 0,65 mils
- Wet Film Thickness: 0.65 mils
- Film Width: 10 mils
- Overall length: 12 inch
Features
- Ideal for uniform drawdowns of thin films
- One inch of space on both ends for easy handling
- Optional bench stand to organize the rods during storage
- Can be ordered in a set of 12 wire rods
Technical Attributes
-
- Gap Clearance Range mil/µm
- {650} - {651}
-
- Dimensions
- ∅ 1.3 x 30.5 cm
-
- Dimensions
- ∅ 0.5 x 12 in
-
- Qty/Box
- 1
-
- Film Width
- 10 in
-
- Wet Film Thickness
- 0.65 mil
-
- Wire Diameter
- 10 mil
Standards
Procedure
- Place substrate to be coated on smooth surface
- Place film applicator on substrate
- Pour coating in front of gap in pulling direction
- Pull at uniform speed (approx. 25 mm/s)
- Put applicator immediately into diluted cleaning solvent and clean with brush
Other Variations
Other ALTANA divisions
A member of
