Your region and language were selected automatically. You can change this at any time in the menu on the site.
Americas | English
  • Americas
  • |
  • English
A member of Altana
6551

Inmont Gage S, 0-40 µm

  • Full Scale Calibration Range: 0 - 40 μm
  • Recommended: 8 - 32 μm
  • Resolution: 2 μm
  • Original Interchemical design for general use
  • Scale is stamped on the outside of the metal wheel; no rotating scale is used
$361.00 €316.00 excl. taxes & shipping cost

Features

  • Very accurate for thin film applications
  • Can be used with moving surfaces
  • Easy to clean
  • Stainless steel construction for long life
  • Metric or mils version available
  • Compliant with ASTM D1212 and ISO 2808 methods
  • Gage holder optionally

Technical Attributes

  • Scale
    Metric
  • Full Scale Calibration Range
    0 - 40 µm
  • Recommended
    8 - 32 µm
  • Resolution
    2 µm
  • Weight
    0.2 kg
  • Weight
    0.5 lb
  • Dimensions
    ∅ 5 x 2.5 cm
  • Dimensions
    ∅ 2 x 1 in

Standards

ISO

2808

ASTM

D1212

Procedure

The gage consists of an eccentric inner wheel, supported by two larger outer concentric wheels. At a specific point, the inner wheel touches and picks up wet film when the gage is rolled on the coated surface. This critical clearance may be read on a rotating scale.
 

The gages may be held between the thumb and forefinger to take a reading, or it may be inserted into the gage holder. This holder is widely used to measure coatings safely on moving surfaces such as high-speed press rollers. It can also be used on stationary, flat, or curved surfaces since the holder makes it easier to exert a steady, even force on the gage.

Subscribe to our Newsletter and stay informed! subscribe