Calibration Shims for Paint Thickness Gauges
Article No. 3740
Calibration Shims 25-500 µm
Paint Thickness Gauge Calibration Standard
Thickness:25 µm (1 mils), 50 µm (2 mils),125 µm (4.9 mils), 250 µm (9.8 mils), 500 µm (19.7 mils), zero plates for Fe/NFe
Features
These plastic shims aid in the calibration of thickness gages on ferrous or non-ferrous metallic substrates. Plastic shims can be
used to calibrate on the actual test substrate.
- Traceable to NIST or BAM standard
- Used to comply with ISO compliance
- All Fischer foils are certified and serialized
- They are traceable to NIST
- All ranges are approximate and will be as close as possible to your requested thickness
- ISO 17025 Certification also available
- 4 options available:
- Copper Beryllium Calibration Standards - for use with magnetic inductance applications only (1.5" x 1")
- Precision Plastic Shims - also known as Mylar Calibration Foils (1.5" x 1.5") (Part no. 11244 is 1.5" x 1")
- Phenolic Calibration Standards (1.5" x 1.5")
- Calibration Shim Kits - include set of 5 calibration shims, Fe zero plate, and NFe zero plate
Technical Attributes
-
- Thickness
- 25 µm (1 mil); 50 µm (2 mil); 125 µm (4.9 mil); 250 µm (9.8 mil); 500 µm (19.7 mil)
Thickness Measurement
Delivery Content
Set of 5 calibration shims
Fe zero plate
NFe zero plate
Fe zero plate
NFe zero plate
Other Variations
Other ALTANA divisions
A member of
