Manual Pull-Off Adhesion Tester

PosiTest AT

Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke
Pull Rate Indicator to manually monitor and adjust the rate of pull

Features

Portable, hand-operated instrument can be used in any position and requires no external power source-ideal for the lab and on-site
Large scale reads clearly and easily in PSI and MPa
Inexpensive, single-use dollies eliminate the need for heating, cleaning, or brushing for re-use
Self-aligning dolly enables measurement on smooth or uneven surfaces without adversely affecting the test results
Quick-coupling makes securing dollies in actuator simple, fast and trouble-free
Multi-purpose, high-tensile two-part adhesive suitable for use with a wide variety of coatings and coating thicknesses
Cutting tool for isolating test area is included
Coating adhesion tester pressure system is calibrated and certified to ±1 % accuracy (full-scale) and comes with a two-year warranty
Internal memory stores up to 200 pulls. This includes maximum pull-off pressure, rate of pull, test duration, and dolly size
Optional PosiSoft software available to upload test results
USB Port PC interface
10, 14, 20, and 50mm dollies

Technical Attributes

Technical Specifications

Standard/Cutter Spacing

-
Adhesion Strength

0 - 20 MPa
Adhesion Strength

0 - 3000 psi
Resolution

± 1.0 psi
Resolution

± 0.01 MPa
Dolly Size

20 mm

General

Weight

5.5 kg
Weight

12 lb
Dimensions: L x W x H

43 x 33 x 15 cm
Dimensions: L x W x H

17 x 13 x 6 in

Standards

ISO

4624 16276-1

ASTM

D4541 D7234

Delivery Content

Adhesion Tester with digital display
Hydraulic pump and actuator
Dolly set 20mm (0030)
Cutting tool for 20 mm dollies
Adhesive Kit (0032)
Flexibel hose 1.5 m (5 ft.)
USB Cable
Certificate of calibration
Manual
Carrying case

Accessories