5128
Adhesion Tester single blade 3mm spacing - ISO 2409
Cross-Cut Kit 6, 1-edge 3 mm
- 6 Teeth
- 3 mm Cutter Spacing
- In accordance with DIN / ISO methods
Features
- Blades made from hardened steel alloy for long life
- Pivoting head blade holder for easy alignment onto the coating surface
- Test kit comes with all the accessories necessary to perform cross-hatch test
Technical Attributes
-
- Standard
- DIN / ISO
-
- Standard/Cutter Spacing
- {408} - {433}
-
- No. of Teeth
- 6
-
- No. of Cutting Edges
- 1
-
- Cutter Spacing
- 3 mm
-
- Cutter Spacing
- 0.12 in
-
- Hex Wrench included
- yes
-
- Material
- wooden handle
Standards
Procedure
ISO standards prescribe that the number of cuts shall be 6, and that the cut in each direction must be according to the film thickness and type of coating used as shown below:
1 mm space for hard substrates (metal) 0 - 60 µm
2 mm space for soft substrates (plastic) 0 - 60 µm
2 mm space for hard or soft substrates 61 - 120 µm
3 mm space for hard or soft substrate 121 - 250 µm
Delivery Content
Cross-Cut Tester kit with blade
Hex wrench for changing blades
Magnifier (5136)
Cleaning brush (5135)
One roll of adhesive tape
Manual
Carrying case
Hex wrench for changing blades
Magnifier (5136)
Cleaning brush (5135)
One roll of adhesive tape
Manual
Carrying case
Downloads
Short Instructions
Accessories
Other Variations
Other ALTANA divisions
A member of
