Your region and language were selected automatically. You can change this at any time in the menu on the site.
Americas | English

Multi-angle color & effect measurement for automation

Article No. 7036

BYK-mac i Robotic
Automated color measurement ready for Industry 4.0

  • Robotic system to be mounted on a robotic arm
  • Excellent correlation to BYK-mac i and BYK-mac i COLOR
  • Communication software, installation kit and smart-chart software included
Click here for the Chinese price list in RMB
$85,450.00 €69,650.00 excl. taxes & shipping cost

Features

The BYK-mac i ROBOTIC allows automated multi-angle color and effect control as it is mounted on a robotic arm. The robotic system ensures measurements on the same area and a high number of measured car bodies.

  • Total color impression:
    • ­5-angle color measurement for light/dark travel evaluation: 15° / 25° / 45° / 75° / 110°
    • Additional color measurement behind the gloss for color flop analysis: -15°
    • ­Sparkle and graininess measurement for flake characterization
  • Detection and quantification of fluorescent light excited in the visible range; Intensity Emission Value
  • Excellent agreement between instruments allowing usage of digital standards among the supply chain
  • Stable, long-term calibration – needed only every three months
  • Temperature independent results between 10 – 40° C – without calibration
  • Stable positioning due to 4 trigger pins on bottom plate – operator influence minimized
  • 10 year warranty on LED light source – no lamp changes needed

Technical Attributes

    Color Measurement

  • Color Geometry
    45° illumination; -15°, 15°, 25°, 45°, 75°, 110° aspecular viewing
  • Measuring Area
    87 x 23 mm (3.4 x 0.9 in)
  • Spectral Range Colorimetric
    400 - 700 nm, 10 nm resolution
  • Measurement Range
    0 to 600 % reflectance
  • Repeatability Color
    0.01 ΔE* (10 consecutive measurements on white)
  • Reproducibility Color
    Grey BCRA II tiles: avg. ΔE* < 0.10 Chromatic BCRA II tiles: avg. ΔE* < 0.25
  • Color Scales
    ΔE*; ΔE CMC; ΔE 94; ΔE 2000; ΔE 99; ΔE DIN6175 and customer specific scales
  • Color Indices
    Flop, Int-Em
  • Illuminants
    A; C; D50; D65; F2; F7; F11; F12; CIE 015:2018 LED illuminants
  • Observer
    2°; 10°
  • Effect Measurement

  • Effect Geometry
    15°, 45°, 75° and diffused illumination; perpendicular viewing with camera
  • Effect Parameters
    ΔS; ΔS_a; ΔS_i; ΔG
  • Repeatability Effect
    S_a / S_i: 5% or > 0.50 / G = ± 0.05
  • Reproducibility Effect
    S_a / S_i: 10% or > 1.00 / G = ± 0.15
  • Object Curvature
    Radius > 40 cm
  • Robotic requirements

    Vibration-free operation

  • General

  • Measuring time
    < 6 seconds
  • Memory
    1000 standards / samples
  • Interface
    RS 422
  • Power supply
    External power supply 24 VDC
  • Weight
    3.5 kg
  • Weight
    7.7 lb
  • Operating temperature
    10 - 42 °C
  • Operating temperature
    50 - 110 °F
  • Relative humidity
    up to 85%, 35° C (95° F); non-condensing
  • Dimensions: L x W x H
    21 x 12.5 x 17.5 cm
  • Dimensions: L x W x H
    8.3 x 5 x 6.9 in

Standards

DIN EN ISO

11664

ASTM

D2244 E308 E1164 E2194

SAE

J1545

DIN

5033 5036 6174 6175-2

Delivery Content

Multi-angle spectrophotometer
White calibration standard with certificate
Color checking tile
Effect checking tile
Protective cap
2 light protection covers (6417)
RS 422 Cable Kit (torsion resistant, drag chain, oil resistant, FTDI)
Mounting Kit (hex key, screws, technical drawings)
Software smart-process and smart-lab with 2 licences each
smart-robotic software
Manual
Carrying Case
2-day training
Subscribe to our Newsletter and stay informed! subscribe
CANCEL