Grind Gages - µm / Hegman, 2 paths

Article No. 1509

Grindometer 15
Grind gage - groove depth range 0-15 µm

Path Size: 13 x 130 mm
No. of Paths: 2
Scales: Micron/Hegman
Range: 0 - 15/ 8 - 6.8

More options

Range

Click here for the Chinese price list in RMB

excl. taxes & shipping cost

Features

The Fineness of Grind Gage is a flat steel block in the surface of which are two flat-bottomed grooves varying uniformly in depth from a maximum at one end of the block to zero near the other end. Groove depth is graduated on the block according to one or more scales used for measuring particle size.

The Hegman scale or National Standard scale may be abbreviated "NS" on the gage. The scale ranges from 0 to 8 with numbers increasing as the particle size decreases.

0 Hegman = 4 mil/100 micron particle size
4 Hegman = 2 mil/50 micron particle size
8 Hegman = 0 mil/0 micron particle size

Grind blocks made of high quality, corrosion resistant stainless steel for extended use
Dual channel designs
Groove depth is graduated on the block showing microns and Hegman scales
Optional Factory Calibration available

Technical Attributes

Technical Specifications

Path Size

1.3 x 13 cm
Scales

µm, Hegman
No. of Paths

2
Range

0 - 15 µm
Range

8 - 6.8 Hegman

General

Weight

1 kg
Weight

2.2 lb
Dimensions: L x W x H

16.9 x 4.2 x 1.3 cm

Standards

ISO

1524

Procedure

Place a slight excess of sample in the deep end of the groove and, with the straight-edge scraper provided, draw the sample toward the shallow end of the groove. Ratings are in terms of the point on the scale where the oversize particles, or traces made by them, first appear in substantial concentration.

Care of Grind Gages: Clean the gage after each use. Use a solvent and a soft cloth. Keep the gage covered or encased at all times when not in use. Protect gages that lie idle for extended periods of time from rust with an oil coating or an oil soaked wrap.

Delivery Content

Grind block
Scraper (1518)
Storage case

Downloads

Product Brochure