Please select your country to see the content for your location.
1125

Impact Tester

Coverall Bend - Impact Tester

  • Complies with ASTM D3281
$2,754.00 excl. taxes & shipping cost

Features

  • Graduated guide tube up to 160 inch-pounds of force
  • Redesigned guide tube to easily hold the weight during sample change-over
  • Indenter built into the weight

Technical Attributes

  • Weights included
    4 lb
  • Scale
    English
  • Weight
    8.2 kg
  • Weight
    18 lb
  • Dimensions: L x W x H
    25 x 25 x 127 cm
  • Dimensions: L x W x H
    10 x 10 x 50 in

Standards

ASTM

D3281

Procedure

Impact Test

For impact studies, the top block is leveled with the plug removed exposing a 1.43 cm (0.563 in) hole. The 1.27 cm (0.50 in) diameter, round-nosed end of the 4 lb weight may now be dropped from any height along the graduated scale on the guide tube from 0 to 160 inch-pounds.

 

Bend Test

To make a bend test, the coated panel 3” x 4” (0.048” thickness) is first bent 180° over the 1/8” rod. The bent panel is placed between the parts of the hinge. Then the impact tool, flat face down, is dropped from any desired height onto the upper part of the hinge. The cylindrical fold in the panel is squeezed into a conical shape.

Delivery Content

Base with arm support
Guide tube with inch-scale (1568)
Falling weight 4 lbs (1571)
Punch
Manual

Downloads

Safety Instructions

Subscribe to our Newsletter and stay informed! subscribe

Please fill out this form in order to access the requested file

Please enter a valid first name
Please enter a valid last name
Please enter a valid company name
Please select an Industrial Sector
Please enter a valid email address
Please enter a valid phone number

By submitting this form I accept the Privacy Policy Statement

You can now download the requested file.

Download