Wet Film Thickness Gauges with wheels (microns)
Nº de art. 6542
Inmont Gage R, 0-100 µm
Wet Film Thickness Gauge with rotating scale
- Full Scale Calibration Range: 0 - 100 µm
- Recommended: 20 - 80 µm
- Resolution: 5 µm
- Has a rotating scale to facilitate accurate gage reading
- No black plate on the opposite side of the wheel
Features
Das Nassfilm-Doppelrad ist auch als IC-Gerät oder Inmont Gerät bekannt. Es ist ideal geeignet zur Messung dünner Schichten z.B. beim Druckprozess.
- Hohe Genauigkeit auch bei dünnen Filmen
- Auch beim laufenden Prozess einsetzbar
- Einfache Reinigung
- Korrosionsbeständiger Edelstahl
- Halter optional
- Mil oder metrische Version
- Übereinstimmend mit ASTM D1212 und ISO 2808
Standards
Procedure
The gage consists of an eccentric inner wheel, supported by two larger outer concentric wheels. At a specific point, the inner wheel touches and picks up wet film when the gage is rolled on the coated surface. This critical clearance may be read on a rotating scale.
The gages may be held between the thumb and forefinger to take a reading, or it may be inserted into the gage holder. This holder is widely used to measure coatings safely on moving surfaces such as high-speed press rollers. It can also be used on stationary, flat, or curved surfaces since the holder makes it easier to exert a steady, even force on the gage.
Downloads
Folleto del producto
Accessories
Other Variations
Other ALTANA divisions
A member of
