Ihre Region und Sprache wurde automatisch ausgewählt. Sie können diese jederzeit im Menü der Seite ändern.
Amerika | Deutsch

PosiTector 6000 Advanced Coating Thickness Gauges

Artikel-Nr. 5602

Memory F3
DFT Gauge w/ built-in Fe probe - cable probes as accessories

  • For measurement on ferrous substrates
  • Built-in probe

 

Wählen Sie Ihr Modell

Click here for the Chinese price list in RMB
$1,165.00 exkl. Steuern & Versand

Features

  • Multiple calibration adjustment options – 1 or 2 point of known thickness
  • Flash display confirms a reading was taken
  • Hi contrast, color flip display allows for right-side-up viewing no matter how one is looking at the gage
  • Solvent, acid, oil, and water resistant
  • Mils/microns switchable
  • Average ZERO feature; ideal for rough or curved substrates
  • Average, min/max, std. dev., number of readings
  • Hi-Lo feature audible and visual alerts when measurement exceeds limits
  • Storage up to of 100,000 readings in up to 1000 batches
  • USB port and Bluetooth® for PC connection
  • Supplied with PosiSoft Windows® statistical analysis software and USB cable
  • Multiple stored calibration adjustments for measuring on a variety of substrates
  • Scan mode – takes continuous readings without lifting the probe
  • Onscreen help, real time graphing
  • SSPC PA2 feature determines if film thickness over a large area conforms to user-specified min/max levels

Technische Eigenschaften

    Technische Spezifikationen

  • Measuring Range Mils / µm
    0 - 60 mil 0 - 1500 µm
  • Full Scale Calibration Range Mils/ µm
    -
  • Schichtdicken-Messung

  • Substrat
    Fe
  • Probe
    eingebaut
  • Messbereich
    0 - 1500 µm
  • Messbereich
    0 - 60 mil
  • Genauigkeit
    0-2 mill: ±(0.05 mil +1 %) > 2 mill: ±(0.1 mil +1 %) 0-50 µm: ±(1 µm +1 %) > 50 µm: ±(2 µm +1 %)
  • Allgemein

  • Gewicht
    0.14 kg
  • Gewicht
    0.31 lb
  • Maße: L x B x H
    13.7 x 6.1 x 1.8 cm
  • Maße: L x B x H
    5.4 x 2.4 x 1.1 in

Normen

ISO

2178 2360 2808

ASTM

B499 D1186 D1400 D7091 E376

Verfahren

  1. Remove the protective plastic cap (if supplied) from probe.
  2. Power-up Gage by pressing the center navigation button. 
  3. Place the probe FLAT on the surface to be measured. HOLD STEADY. When a valid measurement is calculated, the Gage BEEPS twice and the measurement is displayed.
  4. Lift probe AT LEAST 2 INCHES (5cm) from the surface between measurements - OR - leave probe on the surface in the same location for continuous measurements.
  5. If memory is ON while continuous measurements are being taken, only the last value on the display (when the probe is lifted) is stored into memory.

Lieferumfang

Standard gage
Probe F, built-in (5680)
Plastic shims
Wrist strap
USB cable
3 AAA batteries
Certificate
Manual
Rubber holster with belt clip
Nylon carrying with shoulder strap
Melden Sie sich für unseren Newsletter an und bleiben Sie immer auf dem neuesten Stand!Anmelden