Dual Nordson Type Wet Film Thickness Gauges
Artikel-Nr. 14060
Nordson Messkamm, 0,5 - 20 mils
- Dual Nordson Style Gauge
- Mil Side Measurements: 1/2, 1, 1-1/2, 2, 2-1/2, 3, 3-1/2, 4, 5, 6, 7, 8, 10, 12, 16, 20
- Micron Side Measurements: 13, 25, 38, 51, 64, 76, 89, 102, 127, 152, 178, 203, 254, 305, 406, 508
Features
- The Dual Nordson Type Gardco Wet Film Thickness Mil Gauge measures all types of wet coatings in mils and microns such as: paints, lacquers, enamels, adhesives - that are sprayed, dipped, or brushed on a smooth surface.
- This WFT gauge makes it easy for anyone to obtain fast, highly accurate measurement on flat surface.
- Every Nordson Wet Film Thickness Gauge features a mil scale side and a micron scale side.
- Each side has four different faces with a series of flat edges stepped back progressively. The faces can be turned to use a new set of measurement edges.
- Your coating thickness can be read directly by placing the gauge perpendicularly on the painted surface and noting the last and highest edge touched by the film.
Normen
Verfahren
- Place gauge on wet film at 90° angle
- Press into film
- Withdraw and note deepest tooth having paint on it and next higher tooth that is not coated
- The wet film thickness lies between these two readings
- Clean gauge in any suitable solvent immediately after use
The drawing indicates that the tooth marked 3 mils has made contact with the wet paint and the tooth marked 4 mils has not. This indicates that the true wet film thickness of the material is between 3 and 4 mils thick.
Lieferumfang
Nordson Type Gauge and case
Downloads
Betriebsanleitungen
Other ALTANA divisions
A member of
