Abrasion Kits
Article No. 5069
Accessory Kit, ASTM D3450
Abrasion Test Kit with sponge and 1500 g weight
- ASTM D 3450 evaluates the ease of removing soil and stains from interior coating finishes with CIE Y-value measurement
Features
- ASTM D2486 - Scrub accessory kit to evaluate the scrub resistance of wall paints using a cycles-to-failure concept
- ISO11998 - Scrub accessory kit to determine the wet-scrub resistance and cleanability of coatings via weight loss
- ASTM D3450 - Scrub accessory kit to evaluate ease of removing soil and stains from interior coating finishes with CIE Y-value
- ASTM D4213 - Scrub accessory kit to analyze abrasion resistance by measuring weight loss of the paint film relative to a standard
- ASTM D4828 - Scrub accessory kit to analyze ease of removing soil and stains from interior coating finishes with color and 60° gloss analysis
- ASTM D6736 - Scrub accessory kit to evaluate burnish resistance of latex paint to judge the change in gloss after polishing
- Accessory kits can be easily mounted on Gardner-scrub base unit (5060) - please order separately
Standards
Procedure
Sample preparation:
- Apply paint to black plastic panel with a wet film thickness of 3.5 mils and width of 150 mm
- Apply coating in 3-4s to prevent pin holes/holidays and cure for 7 days
Procedure:
- Measure reflectance CIE-Y (R1) of coating on last day of drying
- Apply soilants/stains in straight pairs of lines perpendicular
- Soak sponge in water and squeeze
- Apply liquid or powder cleaner
- Scrub for max. 100 cycles
- Measure reflectance CIE-Y (R2) of the soiled and washed area
- Calculate the reflectance recovery in percent as R2/R1 x 100
Delivery Content
Sponge Holder, 1000 g (5073)
Weight, 500 g (5078)
Sponge, cellulosic (8116)
Glass plate (6980)
Weight, 500 g (5078)
Sponge, cellulosic (8116)
Glass plate (6980)
Downloads
Short Instructions
Operating Manuals
Accessories
Other Variations
Other ALTANA divisions
A member of
