Film Casting Knife

Artikel-Nr. 2328

Film Casting Knife, 20 cm
Adjustable Film Applicator

Gap Clearance: 0-3800 µm
Blade Width: 20.3 cm

Weitere Optionen

Gap Clearance Range mil/µm

Blade Width

Click here for the Chinese price list in RMB

exkl. Steuern & Versand

Features

The film casting knife offers adjustable gap clearances for maximum flexibility.

Adjustable gap clearances for maximum flexibility
Available for gap clearances from 0 to 150 mil or 0 to 3800 µm
Uses highly precise micrometers to set the gap clearance
Large selection of film widths

Technische Eigenschaften

Technical Properties

Blade Width

20.3 cm
Measurement Unit

microns
Gap Clearance Range

0 - 3800 µm

Technical Specifications

Gap Clearance Range mil/µm

0 - 3800 µm

General

Weight

1 kg
Weight

2.1 lb
Dimensions: L x W x H

7.6 x 21.6 x 10 cm
Dimensions: L x W x H

3 x 8.5 x 4 in

Normen

ASTM

D823

Verfahren

Place substrate to be coated on smooth surface
Place film applicator with desired gap depth on substrate
Pour coating in front of gap in pulling direction
Pull at uniform speed (approx. 25 mm/s)
Put applicator immediately into diluted cleaning solvent and clean with brush

After each use, clean the instrument immediately with an appropriate solvent. The channels in which the ends of the blade move must be kept free of test material at all times. Avoid getting any solvent or substrate on the micrometer heads. Always dry the instrument off with a towel after cleaning. If the instrument is not used for a long amount of time, it is recommended to apply a thin film of oil to protect the instrument from corrosion.

Downloads

Produktbroschüre