Applicatori a vaschetta a 4 spessori
Article No. 2057
Applicatore a vaschetta 2x35, 50-200 µm
Applicatore a vaschetta
- Spessore: 50 & 100 & 150 & 200 µm
- Larghezza film: 2 x 35 mm, design a 2-camere, larghezza 35 mm per camera
Certificate:
Features
The 4-sided applicator is a versatile bar applicator with multiple gap clearances. For low viscosity coatings, the applicator frame is the ideal choice.
- 4 gap clearances in one frame
- Useful for non-rigid substrates
- Packaged in a reusable box to prevent damage
- 2-chamber design is available
Technical Attributes
-
- Gap Clearance
- 50 µm 100 µm 150 µm 200 µm
-
- Film Width
- 2 x 3.5 cm
Technical Properties
Standards
Procedure
- Place substrate to be coated on smooth surface
- Place film applicator with desired gap depth on substrate
- Pour coating in front of gap in pulling direction
- Pull at uniform speed (approx. 25 mm / s)
- Put applicator immediately into diluted cleaning solvent and clean with brush
Downloads
Accessories
Other ALTANA divisions
A member of
