Medidor de espesor de capa seca con sensor fijo
Article No. 3790
byko-test Fe/NFe
Medidor de espesor de capa seca, humedad y punto de rocío
- 4 measurements in one instrument: Film thickness Fe/NFe, Air temperature, Relative humidity, Dew point
- SSPC specific mode for standardized measurement protocols and calibration routines
Features
Le jauge d'épaisseur de fim byko-test inclue aussi la mesure du point de rosée alors que la byko-test Lite ne mesure que l'épaisseur de film sec.
- Design compact pour une utilisation à une main
- Ecran couleur avec écran pivotant à 90° et 180°
- Reconnaissance automatique du substrat
- Très haute résistance de la pointe de sonde rubis
- Calibrage zéro, un et deux points
- Blocage des boutons possible pour prendre que des mesures
- Réglage des tolérances hautes et basses pour le Pass/Fail
- Mode statistique avec mémoire de 1000 mesures
- Mode de mesure continu
- Le mode stabilité avertit l’utilisateur lorsque l’instrument n’est pas stable prévenant de mauvaises mesures
Technical Attributes
-
- Measuring Range Mils / µm
- 0 - 79 mil 0 - 2000 µm
-
- Measurement Method
- Film Thickness Fe/NFe - Dew Point
-
- Full Scale Calibration Range Mils/ µm
- -
-
- Certificate
- yes
-
- Substrate Fe
- Steel or Iron
-
- Substrate NFe
- Non-magnetic metals: aluminum, copper, brass, zinc, stainless steel
-
- Measuring Range
- 0 - 2000 µm
-
- Measuring Range
- 0 - 79 mil
-
- Accuracy
-
±2 µm + 3% of measured value
±0,08 mil + 3% of measured value
-
- Minimum Curvature
- Convex 5 mm; Concave 30 mm
-
- Minimum Curvature
- Convex 0.20 in; Concave 1.2 in
-
- Minimum substrate thickness
- Fe: 0,5 mm; NFe: 0,05 mm
-
- Minimum substrate thickness
- Fe: 0,019 in; NFe: 0,002 in
-
- Temperature Measuring Range
- 0 - 50 °C
-
- Temperature Measuring Range
- 32 - 122 °F
-
- Temperature Accuracy
- ±1.5 °C; ±2.7 °F
-
- Humidity Measuring Range
- 0 - 100 % RH
-
- Humidity Accuracy
-
20 - 70 %RH: ±4%
0-19 & 71-100 %RH: ±6%
-
- Memory
- 1000 lecturas
-
- Weight
- 0.16 kg
-
- Weight
- 0.35 lb
-
- Dimensions: L x W x H
- 11.5 x 6.7 x 4.4 cm
-
- Dimensions: L x W x H
- 4.53 x 2.65 x 1.75 in
Technical Specifications
Thickness Measurement
General
Standards
Delivery Content
Instrument
Plaques Zéro (Fe & NFe)
Cales d'épaisseurs (5)
Certificat d'étalonnage
2 Piles AA
Cable USB (3799)
Logiciel de transfert de données (3798)
Manuel
Mallette
Plaques Zéro (Fe & NFe)
Cales d'épaisseurs (5)
Certificat d'étalonnage
2 Piles AA
Cable USB (3799)
Logiciel de transfert de données (3798)
Manuel
Mallette
Downloads
Product Brochure
Safety Instructions
Short Instructions
Knowledge
Film thickness
For all requirements associated with a coating, there is an optimal layer thickness to ensure good flow and leveling, gloss, optimal color uniformity and opacity as well as good protection against environmental influences and corrosion. If the layer thickness is too high, mechanical-technological properties such as mandrel bending tests, stone impact tests and ball impact tests deteriorate, and the cost-effectiveness of the painting process also decreases. For this reason, layer thicknesses are worked out and specified by the paint supplier and quality assurance. These must be regularly checked and documented.
Read moreAccessories
Other Variations
Other ALTANA divisions
A member of
