Su región e idioma se seleccionaron automáticamente. Puede cambiar esto en cualquier momento en el menú del sitio.
Americas | Español

PosiTector 6000 Advanced Coating Thickness Gauges

Nº de art. 5602

Advanced F3
Medidor DFT con sonda Fe integrada - sondas de cable como accesorios

  • For measurement on ferrous substrates
  • Built-in probe

 

Elige tu modelo

Click here for the Chinese price list in RMB
$1,165.00 Excl. impuestos y gastos de envío

Features

  • Multiple calibration adjustment options – 1 or 2 point of known thickness
  • Flash display confirms a reading was taken
  • Hi contrast, color flip display allows for right-side-up viewing no matter how one is looking at the gage
  • Solvent, acid, oil, and water resistant
  • Mils/microns switchable
  • Average ZERO feature; ideal for rough or curved substrates
  • Average, min/max, std. dev., number of readings
  • Hi-Lo feature audible and visual alerts when measurement exceeds limits
  • Storage up to of 100,000 readings in up to 1000 batches
  • USB port and Bluetooth® for PC connection
  • Supplied with PosiSoft Windows® statistical analysis software and USB cable
  • Multiple stored calibration adjustments for measuring on a variety of substrates
  • Scan mode – takes continuous readings without lifting the probe
  • Onscreen help, real time graphing
  • SSPC PA2 feature determines if film thickness over a large area conforms to user-specified min/max levels

Technical Attributes

    Technical Specifications

  • Measuring Range Mils / µm
    0 - 60 mil 0 - 1500 µm
  • Full Scale Calibration Range Mils/ µm
    -
  • Thickness Measurement

  • Substrato
    Ferrous
  • Sonda
    built-in
  • Rango de medida
    0 - 1500 µm
  • Rango de medida
    0 - 60 mil
  • Exactitud
    0-2 mill: ±(0.05 mil +1 %) > 2 mill: ±(0.1 mil +1 %) 0-50 µm: ±(1 µm +1 %) > 50 µm: ±(2 µm +1 %)
  • General

  • Peso
    0.14 kg
  • Peso
    0.31 lb
  • Dimensiones L x W x H
    13.7 x 6.1 x 1.8 cm
  • Dimensiones L x W x H
    5.4 x 2.4 x 1.1 in

Standards

ISO

2178 2360 2808

ASTM

B499 D1186 D1400 D7091 E376

Procedure

  1. Remove the protective plastic cap (if supplied) from probe.
  2. Power-up Gage by pressing the center navigation button. 
  3. Place the probe FLAT on the surface to be measured. HOLD STEADY. When a valid measurement is calculated, the Gage BEEPS twice and the measurement is displayed.
  4. Lift probe AT LEAST 2 INCHES (5cm) from the surface between measurements - OR - leave probe on the surface in the same location for continuous measurements.
  5. If memory is ON while continuous measurements are being taken, only the last value on the display (when the probe is lifted) is stored into memory.

Delivery Content

Standard gage
Probe F, built-in (5680)
Plastic shims
Wrist strap
USB cable
3 AAA batteries
Certificate
Manual
Rubber holster with belt clip
Nylon carrying with shoulder strap
¡Suscríbase a nuestra Newsletter y manténgase informado! SUSCRIBIR
CANCELAR