The byko-drive S is designed to assist the user in achieving consistent film application by maintaining a consistent speed and drawdown pressure. It is compatible with virtually all applicators, both bar and wire types.
Programmable speeds from 2 - 200 mm/sec or 0.1 - 7.9 in/s in 1mm/sec (0.1 in/sec) increments
Adjustable push-bar gap clearance for thicker substrates or large height applicators
User definable start position and stroke length to accommodate a wide range of chart sizes
Built in drying time modes from 4 mins to 4 hours (optional 2141 drying time attachment required)